I Was Just Thinking...
contact Nina at: [email protected]

Nina Allen Freeman » Blog

Using Acrylic Inks

Posted on 12/31/2015 7:59:40 AM
By Nina Allen Freeman
18 Comments
Topics: Acrylic Inks


 "Resting Pelican" acrylic ink by Nina Allen Freeman

 

The weather is miserable and cloudy outside. A good excuse to stay inside to paint and Blog! Lately I am in love with acrylic inks again. I love the strong colors and yet, I can achieve a water-color effect if I want to. They dry to a permanent state like acrylic paint and yet are thin and delicate like watercolor. Acrylic Inks come in little bottles with dropper dispensers. The colors are incredibly intense and concentrated, to the point of intimidation if you are not used to them. The two brands I have used are FW by Daler Rowney and Liquitex. Both have some information on their web sites - but here is what I have learned from experience.

 

Brush or Pen?

You can use them with any implement including brushes, air brush, "dip" type pens or any thing else. In "Resting Pelican" above I used a brush, dip pen, and also dripped the ink on the paper, spreading it with a spray of water. The ink can be diluted with water or used straight from the bottle if you want the most intense color. I also like to use an eye dropper, waxed paper, alcohol and plastic wrap for more effects. The inks play well with mixed media too, layering with collage, acrylic paint, watercolor and pencil. They do tend to bubble up with media containing wax however, which can give some interesting effects.

 

What Surfaces Can You Use?

Acrylic Inks are ideally suited to work on watercolor paper and illustration board. They also do well on many other surfaces if properly prepared with gesso.  "Shrimp Fest" below, is on an 8 x 8 wood panel prepared with several coats of gesso. I also had success on gesso prepared canvas, but would not recommend painting with inks on an unprepared surface.

"Shrimp Fest" acrylic ink by Nina Allen Freeman

 

Should My Acrylic Ink Painting be Varnished?

The answer to this question is not easily found. The general wisdom on acrylic paintings on canvas or wood panels is that after they are completely dry (several days) they should be varnished with a uniform cover of either matte or gloss acrylic varnish. This is very important to protect them from dirt and dust. Paintings on paper or illustration board or other paper type products should be framed under glass or Plexiglas. Paintings are kept for many years and you want yours to look as fresh as it did the day you painted it.

Since Acrylic Ink is an acrylic product and will dry to a hard finish like acrylic paint, I believe it should be treated the same as acrylic paint. Therefore, I recommend after allowing the painting (on canvas or wood panel) to dry for several days; 1 or 2 even coats of gloss or matte acrylic varnish be applied to the surface of the painting for protection. Varnishes are available in fluid form or a spray.

 

How do you Clean Up Acrylic Ink?

When it comes time to clean those brushes, Murphy's Oil Soap, available in the grocery store, works very well to clean your acrylic brushes. Sometimes the droppers that come with the ink containers become clogged with dried ink and stopped up. Alternate rinsing them with water and soaking in alcohol. This will dissolve the dried ink. Be sure all the alcohol is gone before returning the dropper to its bottle of ink.`

 

I welcome your questions and comments about using acrylic inks. Have you tried them? What is your experience with them?

Have a happy and creative 2016.

 

Nina Allen Freeman


I welcome your comments on my Blog posts and look forward to them. If you have questions about painting methods or anything I have mentioned, I will respond to them via email as soon as I am able to. Keep painting! Nina Freeman

Related Posts


Comments

18 Responses to Using Acrylic Inks

I love what your are doing with the birds and the acrylic inks.

How do you keep the acrylic inks from drying out when using??

Dear Judi; I really have not had a problem with the inks drying out so had to think about your question before answering. First; I do live in North Florida which is very humid. Summers here are in the 90s and humidity can be the same as the out side temp or higher. This means paintings dry slower than in other climates.
Second; I use a water mister and wet my paper first before starting to paint, and also dilute my inks with water too. I use the mister to get the inks to blend together on the paper, or dip my brush in the ink diluted with water to paint in certain areas. All this use of water gives me more control and a longer drying time.
Third; I paint with them like you would a watercolor, do a layer, let it dry; paint a second layer, let it dry, etc.
I hope this answers your question. I welcome you comments and thank you for your interet in my web site.
Nina

Hi Nina,

I love your works. They are so vibrant! I have not used acrylic inks yet, but I purchased a set last week ( the FW Daler Rowney brand). I plan to use them this week. I have the spray bottle and I know you can dilute the inks with water, but I have read where some people actually us alcohol with the acrylic inks instead of water. what is your opinion on this? I want to try both ways, with the water and alcohol. i am interested to know what you think and if you have ever tried the alcohol method. thanks

bernice

Dear Bernice, thank you for your comments about my work.
I had not used alcohol with the inks but was intrigued with your suggestion and tried it on a piece of Yupo(artificial paper). I mixed some ink in a plastic condiment cup that restaurants use, I get these in a restaurant supply store with the lids. I found that the ink dried really fast but brushed on very smoothly. This could be a useful technique for some applications. As soon as water is in the mix though, little bubbles appear .i also found it dried very quickly, so you have to work fast.
I personally like a slower drying time so will stick with using water. Good luck with your painting!
Nina

Thank Nina for replying and for experimenting. It was very interesting. I will try both the water and the alcohol myself, but like you, I think I will like a slower drying process.

Again, thank for letting me know the results.
Bernice

Hey Nina,

I've been mixing my acrylic inks with india inks and I just had a question on what you would use to preserve them? A workable fixative works for india inks, but I wasn't sure if it would also protect the acrylic ink. Should I use a workable fixative first then my second coat be a varnish ?

Cheers,
E

Dear Ele
Thank you for your question. Preserving your ink project depends on the support you are using. Most of my work has been done on watercolor paper or illustration board. I use no fixative on these projects and frame them under plex glass to protect them.
Lately I have been painting with the acrylic inks on gesso prepared wood panels which do not need to be framed. These are protected with 2 or 3 coats of clear acrylic varnish after the finished project has had time to completely dry.
If I were doing a mixed media project like you describe, especially with a drawing media like conte crayon or pencil along with the inks, protecting first with a fixative spray is a good idea. You may be able to follow with the varnish but sometimes varnish is difficult to do over drawing media.
Hope this was helpful.

Hi Nina,
It's so kind to offer advice. If you leave the ink to dry can you over lay more ink colour without disturbing the underlying colour. I have drawn in black ink wheat and barley stalks and now want to do the back ground with reds yellows and oranges. First time I've used them so don't want to mess it up as I am pleased with my under drawing. Thank you

I hope your painting turns out, Steven. It sounds like a very interesting subject. I usually put color down first, allow it to dry and do my drawing in black ink on the top. One of my students has done some paintings the same way you are approaching it. She did her drawing in black ink first then put in color in transparent washes. Both methods work well but have a different appearance.
Happy painting!
Nina

Hi, I was given a set of acrylic inks that have just sat on the shelf for a year as I've never used them. They appear to be very thick, most of the articles I've read on them say to use air spray medium to thin them down rather than water and am just wondering what your opinion on the issue is? I am familiar with water colour and your blog heartens my decision to finally experiment with the inks however they appear very very thick.

If your inks are thick they may be too old and dried to use. Sometimes if you shake well and clean the dropper with alcohol you can make them usable again. Normally they are thin and I use water to thin them and alcohol to clean up.
Good luck with your inks!
Nina

Ok thank you, I will dispose of them, as they are thick

Hi Nina. Live your art and your blog! I recently purchased a set of FW acrylic inks. You mention using alcohol to clean up..which alcohol percent do you use? Also, do you have a preference for framing under plexi glass, rather than regular glass? If so, is there a difference other than price or weight?

Hi Nina. I have applied a mix of white acrylic gesso with an added tint of Raw Sienna to a backing board used for picture framing. Have you tried this substrate with acrylic ink? When finished i plan to frame it rather than varnish it with Krylon Kamar. What is your opinion on this? Thx so much.

Hi Mary, so glad you will try the FW inks ! Any alcohol strength will work to clean up and also works to lift dried ink from your painting surface if you make a mistake. Plexiglass is recommended to use in framing by galleries and painting shows because it does not break like glass . It is lightweight too, makes a difference when carting around a lot of paintings! Have fun with your inks! Nina

Mary, I have often used acrylic gesso as a substrate for inks when painting on paper, illustration board, or wood panels. Wood paneling does not need to be framed under glass, but paper surfaces do need to be protected by proper framing. Nina

My daughter Rita (who has Down syndrome and is an artist) recently received acrylic inks for her birthday. She has not tried them before. She splattered some on a page and there seem to be little white clumps in the ink. When I put my finger on one of these, it seems to be some pigment --it was light blue and the ink was blue ink--the clump could easily be squashed into a film on my finger. Just wondering what to do about these little clumps. I noticed a bit of clogging in the dropper so not sure if these just came out of the dropper.


Leave a Comment

Remember Your Info
Check this box if you want email updates when people comment on this post